Leica-biosystems IPS Instrukcja Użytkownika Pobierz pdf (Strona 56)

Instructions for Use V 1.9 RevD - 05/2013

6. Cleaning and Maintenance

Fig. 56

Location plate

• Alsocleanthelocationplate(70) and sealing

lip with (clean) alcohol. The sealing lip (71)

must be completely clean—no ink residue

must be left. Check the sealing lip for damage.

Replace the location plate if the sealing lip is

damaged.

6.3 General maintenance

• Reinsertthelocationplate(70).

Caution!

The location plate must be completely dry.

• Whenthecleaningprocessisfinished,press

any key of the control panel to confirm.

• Theprint headmovesbackto parkingposi-

tion—message "15" disappears from the

display. The printer is once again ready for

printing.

• However, themessage"15" remains in the

display, as the instrument assumes that the

cleaning has not been carried out.

If no button is pressed to acknowledge

the end of the cleaning procedure, the

print head will be closed automati-

cally after a few minutes to prevent it

from drying out.

Only authorized and qualified Leica service personnel may repair

the instrument and access the instrument's internal components.

The Leica IP S printer is virtually maintenance-free.

To ensure smooth operation of the instrument over many years we do rec-

ommend the following:

• Cleantheinstrumentthoroughlyonadailybasis.

• Regularlyremovedustfromtheventilationslotsonthebackoftheinstru-

ment using a brush or a small vacuum cleaner.

• Havetheinstrumentinspectedonceperyearbyaqualifiedserviceen-

gineer authorized by Leica.

• Attheendofthewarrantyperiod,enterintoaservicecontract.Formore

information, please contact your local Leica technical service center.

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 69 70

Brak uwag

Leica-biosystems IPS Instrukcja Użytkownika Strona 56